* 技术参数说明：DS200DCFBG1BGB GE Mark V板 提供控制级电源和机箱风扇电源去车道
DS200DCFBG1B技术规格
| 制造商 | 通用电气公司 |
| 系列 | 马克五世 |
| 零件号码 | DS200DCFBG1B |
| 产品类型 | 电源供应板 |
| 工艺规范 | GEI-100028 |
/u003Cp/u003EThe board features a number of circuits that work to power the board and the installed drive. DS200DCFBG1B is comprised of/u003Cstrong/u003E/u0026nbsp;motor field power, driver, AC/DC monitoring, and control level supply circuits/u003C/strong/u003E. The /u003Cstrong/u003Etwelve jumpers/u003C/strong/u003E and /u003Cstrong/u003Eseven DIP switches/u003C/strong/u003E found on the board provide users with configurable system options. Fuse switch diagnostics are presented using the /u003Cstrong/u003Etwo LED and one neon indicator lights/u003C/strong/u003E found on the board. /u003Cstrong/u003EThree protective fuses /u003C/strong/u003Eprevent any interruptions in power supplies. Voltages can be monitored using the /u003Cstrong/u003Efive test points/u003C/strong/u003E integrated on the board./u003C/p/u003E
/u003Cp/u003E/u003Cstrong/u003EManufacturer provided installation and storage parameters for both the DS200DCFBG1B and the installed drive should be followed. /u003C/strong/u003EThese will prevent any accidental or preventable damages to both units/u003Cstrong/u003E. For a complete guide to wiring and installing the board, please reference the device/u0026rsquo;s manual and datasheet. /u003C/strong/u003EOriginally, technical support for this board and the Mark V series was provided by the manufacturer, General Electric./u003C/p/u003E
/u003Cp/u003E/u003Cstrong/u003EAX Control/u0026rsquo;s friendly and trusted sales staff is available to help with all of your automation needs. For current prices on availabilities and prices on DS200DCFBG1B and other parts, please contact our office by phone or ./u003C/strong/u003E/u003C/p/u003E"}">
产品说明
DS200DCFBG1B是通用电气公司为Mark V板系列生产的电源板。AC2000、CB2000、DC2000、FC2000、ME2000和EX2000系列机器可以将板安装在驱动器中。安装后，此卡可以提供控制级电源和机箱风扇电源去车道。额定电压在38到115伏之间可以通过控制电源变压器直接提供给电路板。电路板的频率取决于输入电压，但范围可以从0至500千赫。
该板具有许多电路，用于为板和安装的驱动器供电。DS200DCFBG1B包括电机磁场电源、驱动器、交流/DC监控和控制级电源电路。这十二个跳线和七个DIP开关为用户提供可配置的系统选项。保险丝开关诊断使用两个LED和一个霓虹灯指示灯在黑板上找到的。三个保护保险丝防止电源中断。可以使用监控电压五个测试点集成在电路板上。
应遵循制造商提供的DS200DCFBG1B和已安装驱动器的安装和存储参数。这将防止对两个单元的任何意外或可预防的损坏。有关电路板布线和安装的完整指南，请参考设备手册和数据表。最初，该板和Mark V系列的技术支持由制造商通用电气公司提供。
* 立即获取惠的价格
➤邮箱 ：sales
➤QQ ：
➤电话/微信 ：+86-
DS200DCFBG1BGB
DS200DCFBG1B Technical Specifications
| Manufacturer | GE General Electric |
| Series | Mark V |
| Part Number | DS200DCFBG1B |
| Product Type | Power Supply Board |
| Instruction Manual | GEI-100028 |
/u003Cp/u003EThe board features a number of circuits that work to power the board and the installed drive. DS200DCFBG1B is comprised of/u003Cstrong/u003E/u0026nbsp;motor field power, driver, AC/DC monitoring, and control level supply circuits/u003C/strong/u003E. The /u003Cstrong/u003Etwelve jumpers/u003C/strong/u003E and /u003Cstrong/u003Eseven DIP switches/u003C/strong/u003E found on the board provide users with configurable system options. Fuse switch diagnostics are presented using the /u003Cstrong/u003Etwo LED and one neon indicator lights/u003C/strong/u003E found on the board. /u003Cstrong/u003EThree protective fuses /u003C/strong/u003Eprevent any interruptions in power supplies. Voltages can be monitored using the /u003Cstrong/u003Efive test points/u003C/strong/u003E integrated on the board./u003C/p/u003E
/u003Cp/u003E/u003Cstrong/u003EManufacturer provided installation and storage parameters for both the DS200DCFBG1B and the installed drive should be followed. /u003C/strong/u003EThese will prevent any accidental or preventable damages to both units/u003Cstrong/u003E. For a complete guide to wiring and installing the board, please reference the device/u0026rsquo;s manual and datasheet. /u003C/strong/u003EOriginally, technical support for this board and the Mark V series was provided by the manufacturer, General Electric./u003C/p/u003E
/u003Cp/u003E/u003Cstrong/u003EAX Control/u0026rsquo;s friendly and trusted sales staff is available to help with all of your automation needs. For current prices on availabilities and prices on DS200DCFBG1B and other parts, please contact our office by phone or ./u003C/strong/u003E/u003C/p/u003E"}">
Product Description
DS200DCFBG1B is a power supply board manufactured by General Electric for the Mark V board series. AC2000, CB2000, DC2000, FC2000, ME2000, and EX2000 series machines can have the board installed in the drive. When installed, this card can provide both control level power and enclosure fan power to the drive. Voltages rated between 38 and 115 VAC can be directly supplied to the board via the control power transformer. Frequencies for the board are dependent upon the input voltage, but can range from 0 to 500 kHz.
The board features a number of circuits that work to power the board and the installed drive. DS200DCFBG1B is comprised of motor field power, driver, AC/DC monitoring, and control level supply circuits. The twelve jumpers and seven DIP switches found on the board provide users with configurable system options. Fuse switch diagnostics are presented using the two LED and one neon indicator lights found on the board. Three protective fuses prevent any interruptions in power supplies. Voltages can be monitored using the five test points integrated on the board.
Manufacturer provided installation and storage parameters for both the DS200DCFBG1B and the installed drive should be followed. These will prevent any accidental or preventable damages to both units. For a complete guide to wiring and installing the board, please reference the device’s manual and datasheet. Originally, technical support for this board and the Mark V series was provided by the manufacturer, General Electric.
